High Efficiency Continuous type microwave pepper powder drying machine

High Efficiency Continuous type microwave pepper powder drying machine

Application Range:

This machine fits for drying and sterilizing powders, granular, sheet-like or gel-like food, and additive, spices, flavoring, medicine, raw material of herbal medicine, nutritional

health products, agricultural & sideline products, non-fired(or oil saving)instant noodles, noodles, rice powder needles, soy products, beef jerky, preserved meat, dried fish,

tea, tobacco and so on; and for drying, peeling and baking almond, peach kernel, groundnut

kernels, chestnut and so on; and for puffing of leisure food, pachyrhizus chips, potato chips, dried

shrimps, fish maw and so on; and for thawing the frozen fish, poultry; and for drying beans; and

for drying and desulfurating and deoxidizing the metallurgical chemical products; and for drying

printing and dyeing products, ceramics, glass, chemical fiber, cotton yarn, wood, leather, bamboo

products, insulation materials, building materials, wood , cork, alveolate, cardboard,corrugated

cardboard, and so on.

Operating principal:
This microwave source adopts continuous microwave magnetron as its microwave oscillation source. The

continuous magnetron is a kind of cross-field microwave radio tube, the direct current field and

the stationary magnetic field are vertical. The anode of the magnetron is a complex system of resonance.

The anode block consists of many little resonant cavity. Between them there is inductance coupling, so the

anode block is the crossover network of microwave. The electron eradiated from the cathode of the magnetron

will firstly be affected by the direct current field and curl like an angle. While the electrons are moving from

the cathode to the anode, the contrail of their movement is like a swing vibration. Under the condition

of synchronism between high frequency field and electron cloud, the electron contrail will rise toward the anode

direction and form electron spoke. Among the spoke, while the electrons are carrying through synchronistically,

they will change the potential energy into high frequency energy and increase the high frequency breadth. After the

magnetron is started, the direct current which is instored in the resonance cavity will be changed into super-high frequency energy, finally, microwave source of enough power will exported through wave-guide.

Features:

1, Fast heating. Microwave heating is completely different with traditional heating mode. It makes

heating medium become heater, do not need heat transfer process. Although thermal conductivity

is poor materials, also can achieve heating temperature in a very short time.

2,Save energy and efficiency. Because materials contain water absorb microwave easily and fever,

so in addition to a small amount of transmission loss outside, almost no other loss, so high

thermal efficiency, save energy.

3, Heating even. No matter how shape of each part of the body, microwave heating all can make

the object and evenly infiltration and electromagnetic wave list to produce the heat. So heating

good uniformity, won't appear the endogenous phenomenon focal.

4, Mouldproof, sterilization, fresh. Microwave heating has thermal and biological effect, can

sterilize and mould proof in low temperature.Due to heating rapidly, the time is short, can

maximum limit save material activity and the vitamin original colour and lustre and nutrition of

food.

5, Craft is advanced, control easily. Microwave heating just have the basic conditions of water,

electricity, as long as control power, can realize microwave heating or terminate immediately, use

microwave equipment can process automation control of heating process and heating process

specification.

6, Covers less area, safety and harmless. Because microwave can be controlled in made of metal

heating indoor and wave, so microwave leak is few, no radiation hazards and harmful gases, do

not produce the waste heat and dust pollution; Neither polluting food, also do not pollute the environment.

Technical parameters:

Microwave drying and sterilization machine for Chinese traditional medicine

Microwave frequency 2450±50MHz

Such as: JN-40

Power supply

380V±10% 50HZ±1% three-phase five-wire

Microwave Output Frequency : 2450±50MHz

Microwave input apparent power: 56KVA

Microwave output power: 40KW

Microwave power adjustment range: 0-40KW(adjustable)

Ambient temperature: -5-40°C

Dehydrate: 40-50kg/h

Relative humidity: 80%, Surrounding environment:no corrosive gas, conductive dust

and explosive gas

Overall dimension(L*W*H): 10680*1440*1750 mm

Transmission speed:0-10m/min(adjustable)

Height of the inlet and outlet :60 mm

Microwave leak accord with a country GB10436-89 standards(

Equipment safety accord with GB-5226Electrical safety standard

accord with a country GB16798-1997 Food machinery health security index

Features:

1. The equipment is made of high-quality 304# stainless steel,fully meet with medicine machinery requirements;

2. Microwave leak:accord with a country GB10436-89 standards(≤5 mw/cm²);

3. Control system: PLC control interface or press-button control;

4. Adopt high-quality Panasonic magnetron,long life,best effect;

5. Low-temperature drying and sterilization,keep material character perfect,keep the ingredient.

As the microwave is needed to specially design for customer, accordiing to customer's requirements.

So just tell us your requirements, let us customize the model for you

Pictures:

If you are interested in our equipment-microwave drying&sterilization machine,please feel free to contact us.

Looking forward to your sooner inquiries.

Thank you very much.

Jinan Adasen Trade.,Ltd