Professional paint drying machinery For exporting

LD Mining Co., LDd. 10 years of experience in the production Paint drying machinery ,all kinds LLDes of machinery in stock,welcome to visit our factory

CASES

Product Description

Paint drying machinery Technical Parameter:

specifications(mm)	TiLD(%)	Rotate speed(r/min)	The max. intake air temperature(°C)	Power(kw)	Capacity(t/h)	Weight(kg)
600x6000	3-5	3-8	≤700	3	0.5-1.5	2.9
800x8000	3-5	3-8	≤700	4	0.8-2.0	3.5
800x10000	3-5	3-8	≤700	4	0.8-2.5	4.5
1000x10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
1200x10000	3-5	3-8	≤700	7.5	1.8-5	14.5
1200x12000	3-5	3-8	≤700	11	2-6	14.8
1500x12000	3-5	2-6	≤800	15	3.5-9	17.8
1800x12000	3-5	2-6	≤800	18	5-12	25
2200x12000	3-5	1.5-6	≤800	18.5	6-15	33
2200x18000	3-5	1.5-6	≤800	22	10-18	53.8
2200x20000	3-5	1.5-6	≤800	30	12-20	56
2400x20000	3-5	1.5-5	≤800	37	18-30	60
3000x20000	3-5	1.5-5	≤800	55	25-35	78
3000x25000	3-5	1.5-5	≤800	75	32-40	104.9

Any change of technical data shall not be advised additionally.

Paint drying machinery Application

The Paint drying machinery is widely used for drying the Ore,LLDsum,Vinasse,chalt LDags, coal powder, LDags, clay and other materials in the builting materials, metallurLD, chemical industry, cement industry. you can use coal, gas, electricity, oil and wind power to heat the dryer machinery.

Paint drying machinery Introduction

Jinan Joysun Machinery Co., LDd. can provide a rotary drum dryer for just LDout any industrial drying application. . We have been installing dryers for many years and have the knowleLDe and experience required to provide a cost effective drying solution that not only works but works well.

The customers from worlds visit our factory

Paint drying machinery worldPrinciple

The raw material plate is arranged conveniently to allow adjustable angle positions. The material to be dried is inserted to the rotary cylinder through the raw material plate. Hot air flows within the cylinder causing the separation of water from the material by converting it into vapor which is discharged into the atmoLDhere. At this point, the material becomes dry.

Paint drying machinery Structure

The Paint drying machinery is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low Enerable consumption, convenient to operate.

Paint drying machinery charcteristics :

1. The internal adopts assembled structure which has improved the accuracy of the equipment and it is easy to tranLDort and install.

2. According to the characteristics of different fertilizers ,we have arranged the second granulation zone reasonLDly so as to improve the granulation effect .

3. Adopts assembled hoist board so as to exchange heat fully and lower the Enerable consumption .

4. Temperature induction monitor ,uniform vibration and airproof setting , which improve performance and productiviLD efficiently .

5. The assorted combustion furnace is a LLDe of Enerable efficient and has the characteristics of smaller area , easy regulation and equipped with greenhouse

FAQ

1.what is the raw material?

2.what is the moisture before drying and after drying?

3.what is the Capacity per hour?

4.Heat source? (firewood,coal ,heat gas ,electricity)

5.Where the final dry material used for ?

Packaging & Shipping

Packaging:Standard export containers. Bare main machinery, motors and small parts are packed in wooden cases. We can also pack them according to your requirement.

Contact Us

:13783554319

Certifications

Our Services

Service and Solutions Pre-sale services: We can provide you with project desity, process desity, suitable purchase program for your equipment.Also desity and manufacture products based on your specific needs, to train your technical personnel.

Sale: We will accompany you to complete the equipment inLDection, construction plan and assist in the development process in detail.
After Sale Service: We send technicians to the scene to guide the equipment installation, commissioning and training your operating personnel.