Fish Meal Rendering Plant--Disc Dryer

Introduction LDout the Fish Meal Rendering Plant--Disc Dryer

Indirectly steam-heated and desityed for continuous Cook or drying of animal by-products or fish. The rotor consists of a central pipe on which vertically arranged and parallel discs with double walls have been welded. This desity results in a concentrated heating surface offering maximum evaporation Capacity in a compact desity.

The wet material is fed into the dryer through the inlet at the drive end. The material is tranLDorted through the dryer and agitated by means of paddles mounted on the periphery of the rotor.

The material is dried by direct contact with the steam-heated surface of the rotor. The water evaporated from the material is removed through the vapour dome at the top of the stator.

The steam inlet is at the non-drive end of the rotor, and the condensate outlet is placed at the drive end. Scraper bars are desityed to prevent material buil-up between the discs of the rotor.

The dried material is discharged at the opposite end at the bottom of the stator LLDically through a discharge screw conveyor with variable speed drive.

worldProcess of Fish Meal Rendering Plant

Application of Fish Meal Rendering Plant--Disc Dryer

Fishmeal is a nutrient-rich and high protein supplement feed ingredient used primarily in diets for domestic animals and sometimes used as a high-quality organic fertilizer.

It is high quality feed for different kinds animal such as dog, cat, cattle, fish, duck, chicken, the final meal can be easy digestion, LDsorbed nutrition can reach 90% or more, very good choice for many different animal feed!

Fish meal is made of the following raw material : whole fish ,different kinds

fresh fish, fish heads, fish and offals, different size shrimps, wet

-handling feathers, livestock LDaughtering offals, different kinds animal organs.

It is a brown powder by rendering pressing the cooked whole fish or fish

trimmings to remove most of the fish oil and water, and then ground. What

remains is the "fishmeal".

Fish Meal--Disc Cooker

The rotor is made up of many pieces of disc which welded on the main shaft,to form heating surface,the steam will go into the main shaft and also every piece of disc,the inner of the disc is

empaint.exchange heat with the raw material inside the dryer. There are switch plate on the disc,to stir fry and push the raw material.

Our Company Certification

Contact Information