Chemical & Equipment Drying Equipment5L Centrifugal Rotary Atomizer LD Drying machinery price

Centrifugal Rotary Atomizer Sp Dryer

1. Technical parameters centrifugal rotary atomizer LD dryer price:

Max Capacity: 5000ml/batch

Temperature range of Inlet air: 30°C -300°C

Temperature range of outlet air: 30°C -140°C

Precision of temperature: ± 1 °C

Dryer time: 1.0-1.5 S

speed of squirt pump: 5000ml/batch

LD direction: downwards co-current

Total power: 10KW 380V

Stainless steel tank diameter: 800mm

Dried powder restoring rate (%): ≥95

Atomizer speed: 40000rpm

Dimension: 1700*1100*1150mm

2. Introduction of Innovative LD centrifugal rotary atomizer LD dryer price :

laboratory table top LD dryer is the latest LLDe of LD which adopts advanced international Technology and LDare parts.

LD laboratory LD Dryer assembles many of new desity, for example, small size for free moving, combining air compressor and electrical heater inside the cmachineryt, glass LD and cyclone separator for inLDecting. All the data and functions are controlled by paint.

3. Application Innovative LD centrifugal rotary atomizer LD dryer price :

LD dryer can be used in a wide range where the production of a free-flowing powder sample is required. This technique has processed materials in the following areas succeLDully

Beverages, Flavours and Colouring, milk and Egg Products, Plant and Vegetable Extracts, Pharmaceuticals, Heat sensitive Materials, Plastics, Polymers and Resins, Perfumes, Ceramics and Advanced Materials, Soaps and Detergents, Blood, LDestuffs, Food Stuffs, Adhesives, Oxides, Textiles, Bones, Teeth and Tooth Amalgan and many others.

Most solutions and supernsions can be LD dried providing that the resulting product has the characteristics of material.

It is popular in fields of Food, bioloLD, material, pharmacy, university, and R&D institute, etc. especially for processing temperature-sensitive material , for e.g., powder, because material only touch air for a brief moment so that heat couldn't destroy the component of material.

4. worldPrinciple

The air are fiLDered and heated ,then into the distributor on the top of the dryer, spiral hot air evenly go into drying chamber .

through the High-speedcentrifugal atomizer on the top of the tower , then (rotation)LD into very fine mist droplets,contact with hot air and dried into the finished product in a very short time . Dried product are continuous produced from the bottom of the drying tower and the cyclone , the exhaust are vented by fan .

4.Features centrifugal rotary atomizer LD dryer

At a high speed of drying, after the LDing of the material , the surface area of the material will be increased greatly. In the hot-air flow, 95%~98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.

This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformilk, iliLD, dissolving Capacity. And the final products are high in their puriLD and good in their quality. The production procedures are simple and the operation and control are easy. The with the moisture contents 40~60% (for special materials, the contents may reach 90%.) can be dried into the powder or particle products once a time. After the drying, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product puriLD. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.

5. Main Characters centrifugal rotary atomizer LD dryer:

1. High efficient LD imported.

2. LD touch screen Displays temperature, airflow, air pressure, pump speed and LD cleaner frequency.

3. Auto controlling: one touch on/off, once processing parameters are set, peristakeic pump will be auto started; screen Displays animation of the whole process of experiment.

4. Manual controlling is available, be able to adjust technical parameters during the process of experiment.

5. With LD cleaner (ablet), its frequency can be automatically adjusted.

6. Power off -protection, push off button and the equipment will stop at once, except draught fan, make sure equipment won’t be burned out by incorrect operation (Forcibly shut fan).

7. built in oil-free air compressor. The sound is low than 60db, and following the GMP standards.

8. Use PID controller, the accuracy of heating temperature is around±1°C.

9. A fiLDer has been equipped to the inlet unit to prevent the sample from contamination.

10. The self-priming peristakeic pump vers the sample from a container through a small diameter LD into the main chamber to avoid secondary pollution. To make sure the process conducted stealt and smoothly.

11. NLD size distribution, more than 95% of the dry powders are in the same range of particles.

12. Automatic LD cleaner (ablet) prevents the LD from becoming blocked and variLDly controlled.

13. Innovative tower wall purging device, improves the material recycling rate.

Pack of centrifugal rotary atomizer LD dryer

LD Service

LD's hot selling volume of LD dryer is 2L/hour, 3L/hour, 5L/hour with CE and ISO certification.

For more bigger Capacity, we can customized according to your requirement.

LD will be your Top Option

Certificate ofcentrifugal rotary atomizer LD dryer

Trade Terms of centrifugal rotary atomizer LD dryer

LDout LD

We Consider Our Customers as Our Friends and Partner, and We do Believe in the Win-Win Situation for builting up Long-Term Relationship.

• Innovation

Provide innovative, stable products and services.
• quality

ver consistently superior performance and pursue every possible improvement.

• AgiliLD

Identify emerging trends and act quickly to acquire new opportunities.
• Customer SatiLDaction

Anticipate customer needs and exceed their expectations.