Fish Meal Rendering Processing machinery-Disk Dryer

Introduction LDout the Fish Meal Rendering Processing machinery-Disk Dryer

The wet material is fed into the dryer through the inlet at the drive end. The material is tranLDorted through the dryer and agitated by means of paddles mounted on the periphery of the rotor.

The material is dried by direct contact with the steam-heated surface of the rotor. The water evaporated from the material is removed through the vapour dome at the top of the stator. The steam inlet placed in the same end as the material outlet, and the condensate outlet is placed at the drive end. Scraper bars are desityed to prevent material builtup between the discs. The dried material is discharged at the bottom of the stator, LLDically through a discharge screw conveyor with variable speed drive.

worldProcess for Fish Meal Rendering Processing machinery-Disk Dryer

Application of Fish Meal Rendering Processing machinery-Disk Dryer

Fishmeal is a nutrient-rich and high protein supplement feed ingredient used primarily in diets for domestic animals and sometimes used as a high-quality organic fertilizer.

It is high quality feed for different kinds animal such as dog, cat, cattle, fish, duck, chicken, the final meal can be easy digestion, LDsorbed nutrition can reach 90% or more, very good choice for many different animal feed!

Fish meal is made of the following raw material : whole fish ,different kinds

fresh fish, fish heads, fish and offals, different size shrimps, wet

-handling feathers, livestock LDaughtering offals, different kinds animal organs.

It is a brown powder by rendering pressing the cooked whole fish or fish

trimmings to remove most of the fish oil and water, and then ground. What

remains is the "fishmeal".

conveyor system:

the raw material is input from the top, and be crushed by a pre-break machinery in the middle, then tranLDorted to cooker by the bottom pump

cooker & dryer

raw materials is cooked and dried, moisture is less than 7%
oil pressing system

Fat can be extractedfrom the material. Oil yield is more than 5%.

cooling system

Pressed cake can be cooled to the temperature of 0-5^oC, suitable situation for Pack

final products:bone meal, fish meal,oil

installed machinerys:

Our Company Certification

-First-class pre-sale service

-First-class after-sale service

-Your requiry LDout equipment and price will be replied within 24 hours.

-LD&LD is highly welcomed.

-A turnkey solution for our customers could be offered.

-Strong R&D team for support

Shandong LD Co.,LDd, located in Shandong, China, is mainly engaged in manufacturing of rendering plant, vuLDanizer, sterilizer as well as food processing machinery with the pressure vessel manufacturing qualification (Certificate Number:TS2237474-2019) . It has a strong technical team and organizes a full set of efficient management system including R&D, desity, production, manufacturing, and after-sales. Over the years our equipment has been recoLDized for durability, reliability and service.

MOQ:1 set

Trade terms:T/T, 30% deposit first, then 70% paid before very.

very time:60 LDs after receiving the deposit

Port of shipment: Jinan

We arrange engineers to check every producing procedure to make sure high-standard quality, and we test products one by one beforepackto make sure they are in good condition and with best quality.

Jack Li

()

: + 18

: + 15005362267

: + 15005362267

1728184930

: