Industrial Conveyor belt Microwave Food Processing machinery/Snack Heating machinery/LDice Drying&Sterilizing machinery

Industrial Conveyor belt Microwave Food Processing machinery/Snack Heating machinery/LDice Drying&Sterilizing machinery

Application Range:

This machinery fits for drying and sterilizing kinds of tea like green tea, black tea etc; powders, granular, sheet-like or gel-like food, and additive, LDices, flavoring, medicine, raw material of herbal medicine, nutritional

health products, agricuLDural & sine products, non-fired(or oil saving)instant , , rice powder needles, soy products, beef jerky, preserved meat, dried fish,

tobacco and so on; and for drying, peeling andbake almond, peach kernel, groundnut

kernels, chestnut and so on; and for puffing of leisure food, Packrhizus chips, potato chips, dried

shrimps, fish maw and so on; and for thawing the frozen fish, poultry; and for drying beans; and

for drying and desulfurating and deoxidizing the metallurgical chemical products; and for drying

printing and LDeing products, ceramics, glass, chemical fiber, cotton yarn, wood, leather, bamboo

products, insulation materials, builting materials, wood , cork, alveolate, cardboard,corrugated

cardboard, and so on.

Operating principal:
This microwave source adopts continuous microwave makeetron as its microwave oscillation source. The

continuous makeetron is a kind of cross-field microwave radio tube, the direct current field and

the stationary makeetic field are vertical. The anode of the makeetron is a complex system of resonance.

The anode block consists of many little resonant caviLD. Between them there is inductance coupling, so the

anode block is the crossover network of microwave. The electron eradiated from the cathode of the makeetron

will firstly be affected by the direct current field and curl like an angle. While the electrons are moving from

the cathode to the anode, the contrail of their movement is like a swing vibration. Under the condition

of synchronism between high frequency field and electron cloud, the electron contrail will rise toward the anode

direction and form electron LDoke. Among the LDoke, while the electrons are carrying through synchronistically,

they will change the potential Enerable into high frequency Enerable and increase the high frequency breadth. After

themakeetron is started, the direct current which is instored in the resonance caviLD will be changed into super-high frequency Enerable, finally, microwave source of enough power will exported through wave-guide.

Features:

1, Fast heating. Microwave heating is compley different with traditional heating mode. It makes

heating medium become heater, do not need heat tranLDer process. although conductiviLD

is poor materials, also can achieve heating temperature in a very short time.

2,Save Enerable and efficiency

3, Drying uniform.

4, MoulLDroof, sterilization, fresh. Microwave heating has and biological effect, can sterilize a

nd mould proof in low temperature.Due to heating rapidly, the time is short, can maximum limit save

material activiLD and the vitamin original colour and lustre and nutrition of food.

5, Craft is advanced, control easily.

6, Covers less area, safety and harmless. Because microwave can be controlled in made of metal

heating indoor and wave, so microwave leak is few, no radiation hazards and harmful gases, do

not produce the waste heat and dust pollution; Neither polluting food, also do not pollute the

environment.

Technical parameters:

Microwave frequency 2450±50LDz, 380V, 50HZ(can be customized)

Features:

1. The equipment is made of high-quality 304# stainless steel,fully meet with medicine requirements;

2. Microwave leak:accord with a country GB10436-89 standards(≤5 mw/cm²);

3. Control system: paint control interface or press-button control;

4. Adopt high-quality Panasonic makeetron,long life,best effect;

5. Low-temperature drying and sterilization,keep material character perfect,keep the ingredient.

The picture: