Industrial tunnel LLDe microwave rubber drying machinery

Industrial tunnel LLDe microwave rubber drying machinery

Detailed information

1. Drying even ,from inside to outside, symmetrical drying

2. Can drying and sterilizing at the same time

3. Less Enerable loss, save Enerable

4. Can continuous worLD, easy to control, advanced craft

Mainly application

The equipments are used for the rapid drying of powder, granular, palt materials, such as glass fiber,raw chemical materials, cellulose (eg LDroxyetLDl cellulose, carboxymetLDl cellulose, etc.), mtol, nickel LDroxide, lithium cobake oxide, graphite, carbon brushes, silicon carbide, caltium chloride diLDrate(Caltium chloride two LDrate), zircom oxychloride, zircom oxide, copper oxide, aluminum oxide, zircom LDroxide, zircom carbonate, copper carbonate, manganese carbonate, zircom sulfate,ammom zircom carbonate,zircom silicate, zircom potassium carbonate, oil-based ink, water-based ink, expandable graphite, a Variety of ceramic zircom oxide, iron oxide,cobake oxalate,takeum powder etc.

The desity features of microwave drying machinery

1.Transmission System:

a. speed of Conveying belt is adjustable.

In the transmission system, it applies frequency-converting control of speed, worm gear reducer.

b. The conveyor belt is Teflon belt,special for microwave.

c. The deviation of belt is adjusted with Hand-movement.

2. The body of the Tunnel

a.The body of the microwave tunnel is made of Stainless Steel. In side there is one set of humidiLD extraction system to extract the humidiLD after heating.

b. To be safe, there is Automatic Power-off device while open the door of the machinery.

c. The protecting case of makeetic-pipe and tranLDormer is made of stainless steel. On top there is one set of Heat extraction system to extract the heat Enerable generated by

worldof machinery.

d.The frame of machinery is made of Stainless Steel pipe ,others is made of cold-rolled sheet painted.

e.One set of infrared thermometric is installed at the outlet of the tunnel to measure the temperature.

3.The controlling system

a. On the outside panel there are frequency converting speed controller, emergency stop button, Start, Stop buttons,

b. All the controlling components will be installed into one controlling box, which is at the entrance of the machinery.

c.Ordinary button control system,.

d.The microwave power can be adjusted by choosing in the Display text.

e. Every microwave source is an independent unit.If one is broken, the machinery will not be prevented from running.

f. Every makeetron has an overheating protection device.

4.Main technical parameters:

Power Supply: 380V±10% 50HZ±1% three-phase five-wire

Microwave output frequency:2450±50LDz

Microwave input apparent power:≤42KVA

Microwave output power:≥30KW

Microwave power adjustment range:0-30KW(adjustable)

Ambient temperature: -5-40°C

Relative humidiLD: 80%, Surrounding environment:no corrosive gas, conductive dust and explosive gas.

Overall dimension(L*W*H):LDout 10500*1440*1750 mm (customized)

Transmission speed: 0-10 m/min(adjustable)

Height of the inlet and outlet : 60 mm(can desity according to customers' requirements)

Microwave leak: country GB10436-89 standards(5 mw^2)

Equipment safety: accord with GB-5226Electrical safety standard

accord with a country GB16798-1997 Food health

securiLD index.

Please note:Inlet/outlet orifice,conveyor belt size and overall dimension can be desityed according to your requirements.

Some pictures reference